1746 Us-20
West Lebanon, NY 12195


518-623-0073


  • Home
  • Pricing
  • Contact Us
  • About us
  • Pictures

Wood deck flatbeds



Single rear wheel

Platform up to 101 Inches $ 1049.00

Platform up to 124 Inches $ 1214.00


Dual Rear Wheel

Platform up to 101 Inches $ 1079.00

Platform up to 124 inches $ 1244.00

Platform up to 148 Inches $ 1400.00

Platform up to 196 Inches $ 1600.00

Platform above 196 Inches $ CALL $


These prices with the current pricing of wood is for the platform only. No wood included. Should

you decide you want wood we offer these flatbeds with wood cut ready to install or wood installed

for an additional price ( cost of wood )


PLEASE SEE FLATBED OPTIONS BELOW FOR PRICING



flatplate steel flatbeds



Single Rear Wheel

Platform up to 97 inches $ 1299.00

Platform up to 122 Inches $ 1364.00


Dual Rear Wheel

Platform up to 97 Inches $ 1349.00

Platform up to 122 Inches $ 1599.00

Platform up to 146 Inches $ 1699.00

Platform up to 194 Inches $ 2300.00

Platform over 194 Inches $ CALL $


PLEASE SEE FLATBED OPTIONS BELOW FOR PRICING



DIAMOND PLATE FLAtBEDS



Single Rear Wheel

Platform up to 97 Inches $ 1299.00

Platform up to 122 Inches $ 1464.00


Dual Rear Wheel

Platform up to 97 Inches $ 1449.00

Platform up to 122 Inches $ 1699.00

Platform up to 145 Inches $ 1899.00

Platform up to 197 Inches $ 2500.00

Platform over 197 Inches $ CALL $


PLEASE SEE FLATBED OPTIONS BELOW FOR PRICING



standard flatbed options



RUBRAIL AND STAKE POCKETS​


Sides only up to 10 Feet long $ 75.00

Rear only $ 75.00

Rubrail is made of 3/16 x 3 inch flatbar steel, Stake pockets are made of 2x4 steel

Heavier Duty rubrails and stake pockets are available if needed

_________________________________________________________________________________________

BACK DROPS ( REAR SKIRT )

( squared or angle cut )

Back drop ( up to 16" long ) 155.00 ( we now offer backdrops without led tail lights if desired )

** Backdrops are made of Diamond plate steel, 3/4" LED marker lights and LED license plate light with license plate mount

Backdrop LED Tail lights $ 50.00 6" oval surface mount

Backdrop LED reverse lights $ 50.00 4" round super bright reverse lights ( also work great for work lights )

Back drop Supports $ 25.00

Back drop step ( short step ) up to 26 inches $ 55.00

Back drop step Full length ( with supports ) $ 125.00

_________________________________________________________________________________________

CAB PROTECTOR

( this is the steel that comes off the platform usually up to the bottom of the truck rear window )


Cab protector diamond plate steel $ 125.00

_________________________________________________________________________________________

HEAD RACKS


Standard Headrack $ 75.00 ( must have a cab protector for this option )

Landscape Headrack $ 375.00 ( no cab protector required ) This is a squared headrack

Headrack lights Stop/tail/turn $ 75.00

Headrack lights Reverse $ 50.00

Headrack Work lights $ 65.00

Headrack glass protector $ 100.00 ( Expanded metal style )

Headrack Glass Protector $ 125.00 ( louver style )

_________________________________________________________________________________________

PAINTING


Bare Steel non prepped $ FREE

Primer only $ 75.00

Painted: Wood deck SRW $ 165.00 Wood deck DRW $ 150.00

Steel Deck SRW $ 245.00 Steel Deck DRW $ 290.00


**** WE NOW OFFER AS OF 10/17/2022 POR 15, 3 STAGE PAINTING. THIS IS A HIGH GLOSS POR 15 TOP COAT. CALL FOR PRICING OF THIS ON YOUR FLATBED ****

**** Painting pricing is for flatbeds up to 101" long. Longer flatbeds have a separate price


***** SPECIAL NOTE ON PAINTING ****

We use enamel or implement paint for black

Silver ( aluminum ) is enamel

WE NO LONGER OFFER BEDLINER PAINT

WE DO NOT OFFER POWDER COATING or base coat/clear coat


IF YOU ARE LOOKING FOR A HIGHER QUALITY PAINT JOB THAN OUR NOW OFFERED POR 15, THAN WE SUGGEST YOU GET THE FLATBED BARE STEEL OR PRIMER ONLY AND DO YOUR OWN PAINTING OR HAVE A BODY SHOP PAINT IT. THE CHEMICALS USED IN ENAMEL AND IMPLIMENT PAINT HAVE BEEN REDUCED OVER THE YEARS AND THE PAINT QUALITY IS NOT NEAR WHAT IS HAS BEEN AND WE APOLOGIZE IN ADVANCE. WE OURSELVES ARE NOT HAPPY WITH THE LONG TERM PAINT QUALITY OF THE OIL BASED PAINTS THAT IS CURRENTLY OFFERED, ALTHOUGH WE UNDERSTAND THAT THE GENERAL CUSTOMER DOES NOT HAVE ACCESS TO PAINTSHOPS OR HAS THE EQUIPMENT TO PAINT THE FLATBED THEMSELVES.

_________________________________________________________________________________________

TOOL BOXES

There is way to many options to list them all here, we request that you please give us a call so we can get you an accurate and current price

_________________________________________________________________________________________

SIDES AND TAILGATES


FIXED SIDES up to 8' long $ 200.00 ea, 8' to 10' long $ 235.00 ea, 10' to 12' long $ 255.00 ea

FOLD DOWN SIDES (light duty) up to 8' long $ 250.00 ea, 8' to 10' long $ 275.00 ea, 10' to 12' long $ 325.00 ea

FOLD DOWN SIDES (heavy duty) up to 8' long $ 325.00 ea, 8 - 10' long $ 350.00 ea, 10' - 12' long $ 400.00 ea

REAR TAIL GATE ( Heavy Duty ) SRW $ 345.00, DRW $ 385.00, adjustable chains $ 45.00

_________________________________________________________________________________________

INSTALLATION KIT


We offer an installation kit for your truck. This kit will incluse grade 8 bolts, nylock nuts, washers and 2x2 steel that will be cut to length for your current bed mounts. Holes will need to be drilled in the steel to match up to your existing bed bolt holes in your frame. Once these arre bolted to your truck frame the flatbed slides onto these mounts and will need to be welded to the subframe of the flatbed.


Install kit $ 65.00

_________________________________________________________________________________________

ADDITIONAL LIGHTING


6" Oval lights $ 15.00 each Stop/Tail/Turn

6" Oval lights $ 20.00 Reverse

3/4" marker lights $ 5.00 each ( for trucks over 90" wide the DOT strip is included in the flatbed )

Recessed LED work lights $ 25.00 each

_________________________________________________________________________________________

MOST COMMON AD ON ITEMS


Trailer connector Standard 7 way installed in backdrop $ 40.00

Trailer Connector 7 way with 4 way installed in backdrop $ 65.00

Extra Stake pockets $ 5.00 each

Weld on D-Rings $ 10.00 each

All standard lights, stop/tail/turn/reverse/marker and license plate light wired to an plug and play $ 105.00

_________________________________________________________________________________________

NEEDLE SCALING


Please click this link to be brought to our needle scaling page for more information on this service and why you may want this performed.






Northeast Custom Flatbeds



1746 US-20, West LEbanon, ny 12195